|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
USEFUL FORMULAS WEIGHT
FORMULAS
For
Stainless Steel
| CIRCLE-AREA | SQUARE OF DIAMETER X .7854 |
| CIRCLE - CIRCUMFERENCE | DIAMETER X 3.1414 |
| CONTENTS | AREA OF BASE X (.333 X ALITITUDE) |
| CYLINDRICAL... | LENGTH X (SQUARE OF DIAMETER) X.0034 |
| CYLINDER - AREA | LENGTH X CIRCUMFERENCE OF THE BODY + AREA OF BOTH ENDS |
| CYLINDER VOLUME | AREA OF BASE X PERPENDICULAR HEIGHT |
| ELLIPSE | PRODUCT OF AXES BY .7854 |
| ELLIPTICAL | LENGTH X SHORT
DIAMETER X LONG DIAMETER .gif){kind=small} X .0034 |
| HEXAGON | AREA ON THE INSCRIBE CIRCLE X 1.1027 |
| OCTAGON | DISTANCE ACROSS, SQUARED X .82843 |
| PARALLELOGRAM | BASE X PERPENDICULAR HEIGHT |
| RECTANGLE - AREA | LENGTH X WIDTH |
| RECTANGULAR... | LENGTH X WIDTH X
DEPTH = (THIS TOTAL)DIVIDED BY 231.0 |
| SPHERE AREA | SQUARE OF DIAMETER X 3.1416 (OR) DIAMETER X CIRCUMFERENCE |
| SPHERE VOLUME | CUBE OF DIAMETER X .5236 |
| SQUARE CIRCUMFERENCE OF CIRCUMSCRIBING CIRCLE | SIDE X 4.443 |
| SQUARE DIAMETER OF CIRCUMSCRIBING CIRCLE | SIDE OF SQUARE X 1.4142 |
| SQUARE SIDE OF INSCRIBED SQUARE | DIAMETER X .7071...(OR) CIRCUMFERENCE X .2251 |
| SQUARE - SIDE OF EQUAL SQUARE | DIAMETER X .8862 |
| TANK - CAPACITY IN GALLONS | (MEASUREMENTS MUST BE INCHES |
| TRIANGLE | HALF HEIGHT X BASE |
|
WEIGHT PER LIN. FT (12") FLATS: 3.44 X T X W HEXAGONS: 2.977 X Dia. sq. OCTAGON: 2.977 X Dia. sq. ROUNDS: 2.70 X Dia. sq. SQUARES: 3.44 X T X W TUBING: 10.79 X (OD-WL) X WL
WEIGHT PER PIECE BLANKS: .286 X T X W X L CIRCLES: .225 X T X Dia Sq. RINGS: .225 X T X (ODsq-IDsq) |
|
|
DISCLAIMER Falcon has gathered the information contained in this web site from many different printed sources. The characteristics, applications and other information contained are given as a guide. The reader must make their own evaluation based on their own research and more specific information than that supplied by Falcon. Falcon Stainless & Alloys Corp. and Falcon Div., are resellers and processors of these materials and makes no guarantees or warranties, either expressed or implied, regarding the accuracy of the information supplied or the suitability of any material for any application. |
|